No. SLT213E

1. Unique identification code of the product type:

Slotted Post - Semi-dry - End

2. Type, batch or serial number or any other element allowing identification of the construction product as required under Article 11(4) of the CPR:

SLT213E - Slotted Post - Semi-dry - End
For prefabricated timber panels (with or without a base panel)
Length (mm): 2135 Profile (mm): 94 x 109

3. Intended use or uses of the construction product, in accordance with the applicable harmonized technical specification, as foreseen by the manufacturer:

Intended use for non structural and lightly structural boundary fencing

4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under Article 11(5):

Anderton Concrete Products Limited
Coppingford Hall, Coppingford Road, Sawtry, Cambridgeshire, PE28 5GP, UK

5. System of assessment and verification of constancy of performance of the construction product as set out in Annex V:

System 4

6. In case of the declaration of performance concerning a construction product covered by a harmonized standard:

EN 12839:2012
Notified Body: Not applicable

7. Declared performance:

Essential CharacteristicsPerformanceHarmonised
Compressive strength, fck
C35/45 N/mm2
EN 12839:2012
Reinforcing Steel:
Ultimate tensile strength, ftk
Tensile yield strength, fyk
NPD N/mm2
NPD N/mm2
Load bearing capacity:
Characteristic values
Material safety factors applied in strength calculation:
For concrete, YC:
For steel, YS:
Durability of the load bearing capacity:NPD
For geometrical data, see the Technical Documentation.

Technical Documentation:
Product Catalogue

8. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 7. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.

Signed for and on behalf of the manufacturer by:

Name: Will Hicks
Position: Ibstock Concrete Operations Director
Place: Coppingford Hall, PE28 5GP, UK
Date: 3rd February 2020